previous vectron model numbers c4650, 4884 frequency range 4 mhz ? 15 mhz standard frequencies 5, 10 mhz parameter min typ max units operating temp range vs. operating temperature range -5 +5 ppb 0 ? +70c (referenced to +25c) -7 +7 ppb -20 ? +70c -10 +10 ppb -40 ? +70c parameter min typ max units condition initial tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / 1 year vs. aging / year (following years) -250 -1.0 -1.0 -0.5 -50 -30 +250 +1.0 +1.0 +0.5 +50 +30 ppb ppb ppb ppb ppb ppb at time of shipment, nominal efc v s 5% load 5% after 72 hours of operation after 72 hours of operation warm-up time 10 minutes to 10ppb of ? nal frequency (1 hour reading) @ +25c ox-060 oven controlled crystal oscillator frequency stabilities 1 [sc cut crystal) base stations test equipment synthesizers digital switching very high stability low aging sc-cut crystal standard features typical applications http://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 ox-060
parameter min typ max units condition supply voltage [standard] 11.4 12.0 12.6 vdc supply voltage [option] 14.25 15.0 15.75 vdc power consumption 6.0 watts during warm-up 1.5 watts steady state @ +25c parameter min typ max units condition signal [standard] hcmos load 15 pf signal level (vol) 0.5 vdc with 15pf load signal level (voh) 4.5 vdc with 15pf load duty cycle 40 60 % @ (voh-vol)/2 signal [option] sinewave load 50 ohm output power +5.0 +7.0 +9.0 dbm 50 ohm load harmonics -30 dbc 50 ohm load parameter min typ max units condition tuning range 0.3 0.6 1.0 ppm linearity 20 % tuning slope positive control voltage range 0.0 2.5 5.0 vdc parameter min typ max units condition reference voltage 4.7 4.9 5.1 vdc phase noise3 -95 -125 -145 -150 -155 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz 1 10 100 1 10 hz hz hz khz khz at 10 mhz weight 53.0 g processing & packing handling & processing note parameter min typ max units condition supply voltage (vs) 28.0 v output load 50 25 pf ohm with hcmos signal with sinewave signal operable temperature range -55 +85 c storage temperature range -55 +125 c frequency tuning (efc) rf output supply voltage (vs) http://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 additional parameters absolute maximum ratings
type a height ?h? = 25.40 mm, pin length ?l? = 6.40 mm dimensions: mm pin connections 1 ground (case) 4 supply voltage input (vs) 2 electronic frequency control input(efc) 5 rf output 3 reference voltage output http://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 enclosure
use this worksheet to forward the following information to your factory representative : model height - supply voltage code rf output code temperature range - stability frequency control/ enable - frequency ox-060 0 - b a j - 509 0 - 10m0000000 notes: 1 contact factory for improved stabilities or additional product options. not all options and codes are available at all frequencies. 2 unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c) 3 phase noise degrades with increasing output frequency. 4 subject to technical modi? cation. 5 contact factory for availability. http://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 how to order this product: stability code: 509: 5ppb 709: 7ppb 108: 10ppb supply voltage code: a: 15 v b: 12 v temperature range: d: -40 ... +70c j: -20 ...+70c t: 0 ...+70c frequency control: 0: 0.3...1.0 ppm height: 0: 25.4 mm rf output code: a: hcmos e: sinewave
|
